Sanix - Rocky vs. Drago
📦 Archive Size: 4.93 GB
🖨️ Compatibility: Resin (SLA/DLP) & FDM
🛠️ Scale Options: 28mm / 32mm / 75mm / 1:6
🎲 Files Included: Hollowed & Solid + Supports
About this 3D Model
Capture the raw intensity of the most legendary boxing match in history with Sanix’s "Rocky vs. Drago" diorama. This high-fidelity sculpt perfectly encapsulates the climactic moment of the 1985 classic, featuring Rocky Balboa in his iconic American flag trunks and Ivan Drago in his Soviet-inspired red and gold gear.
🛠️ Recommended Slicer & 3D Print Settings
Calibrated for SLA Resin & FDMTo achieve maximum surface detail and crisp feature definition for Sanix - Rocky vs. Drago, our community test prints recommend the following calibrated slicer configurations for Chitubox, Lychee, and Bambu Studio:
🔬 Layer Height
0.12 – 0.16 mm (FDM) / 0.05 mm (Resin)
High precision display resolution
⏱️ Normal Exposure
2.6s – 3.0s (Resin) / 200°C PLA+
Monochrome LCD screen at 25°C
🛡️ Base / Burn-In Layers
4–6 Layers @ 25s–32s
Optimal build plate adhesion
📐 Model Orientation
30° – 45° Angle
Minimizes peel forces & suction
🧪 Recommended Resin
PLA+ Filament or Standard Resin
Low shrinkage, crisp detail
🧽 Post-Processing
99% IPA + 3m UV Cure
Wash, warm water support removal
Maker Tip for Scenery, Terrain & Diorama: For large ruins and dungeon tiles on FDM printers, use 10% gyroid infill and 3 outer perimeters. This keeps print times fast while providing maximum tabletop weight resistance.
